|
|
Heating and hot water of sports building in renewable energy
Horský, Martin ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The aim of my work is the heating and hot water for multi-functional building. The first part is devoted to solar systems. And both in terms of use and usability as well as the requirements relating to individual elements of the solar system.Conclusion The first part is devoted to the practical design of solar equipment forhot water. In the second part is devoted to design heating polifunkčního house. There isperformed a complete calculation and design. And the calculation of heat losses to the design of boiler and its connection to the system.
|
|
|
Passive apartment building
Čejka, Radek ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The aim of the thesis is the proposal and the preparation of project documentation for the construction of passive residential building on a plot number 1691/96 cadastral area of Černovice in a Brno city. The residential building will be built in a sloping terrain. It is a five-storey residential building with one floor below ground. The house has 16 residential units and is designed for a maximum of 40 people. Two of the units are designed as a wheelchair accessible. The skeletal staircase of a building is located outside the main building. The residential units are connected by porch. The porch is built from a steel skeleton and is standing outside the main building. At the south side of building is free standing steel construction used as balcony for residential units. Perimeter wall is made of sand-lime blocks which are insulated by graphite expanded polystyrene. Perimeter wall of basement is made of permanent formwork filled with concrete. The wall is also insulated with extruded polystyrene. The ceilings are made of prestressed concrete panels Spiroll. The supporting roof structure is made of wood trusses. The roof is pitched and the roof deck is designed vegetational. The building is ventilated using forced air handling unit. Heating and hot water is provided sources: pellet boiler and photothermic panels. The apartment house is designed with regard to energy saving as passive. Emphasis is placed on a compact building envelope, simplicity of shape, air tightness, low heat loss and high solar gain arising due the building orientation to the cardinal directions.
|
|
|
Solar Gains in Buildings
Tenora, Tomáš ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
Master’s thesis deals with solar gains in buildings. The thesis presents an overview of the theoretical knowledge to solve solar gain. The thesis deals possibilities of measuring the intensity of solar radiation and evaluation of data from the meteorological station in the experimental part. Application of topic is then used for polyfunctional building. This part aims to show possibilities of design of air conditioning systems for the purpose of making indoor microclimate and their subsequent evaluation.
|
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
|
| |
|
|
Wellness Čeladná
Kozumplíková, Markéta ; Müllerová, Eva (referee) ; Müller, Jan (advisor)
The aim of this master thesis is to design a low-energy building for civic amenities, specifically the design of a recreational wellness centre. The building has an L-shaped floor plan with a flat roof and is designed with two above ground and one underground floor. The ground floor will serve as a wellness centre with a swimming pool and saunas. Massages and solariums are proposed on the 2nd floor. Technical facilities are located in the basement. The first part of the thesis is devoted to the architectural and structural design. Structurally, the building is divided into two parts. The part of the administrative facilities and the massage rooms consists of a construction of the character of a transverse wall system made of cut brick blocks and insulated with ETICS. The internal masonry is designed in ceramic ground bricks. Ceiling structures are in the form of continuous reinforced concrete slab. The building is based on footings and waist foundations. The roof of the building is single-skin flat with a gravel. The wellness part is made up of a monolithic diaphragm skeleton with high slenderness columns. The horizontal load-bearing structure in this case again consists of a continuous monolithic reinforced concrete slab. The second part of the thesis deals mainly with the environmental engineering of the buildings. The building will be heated by a pellet boiler and will also use energy from photovoltaic panels. Ventilation in the building is provided by air handling units with heat recovery. The third part of the thesis deals with the assessment of solar gains in the indoor environment of the pool hall. Three variants are proposed with multi-criteria evaluation and the optimal option is selected. The thesis is mainly elaborated in Archicad, Deksoft, MS Excel and Word software.
|
|
|
Heating and hot water of sports building in renewable energy
Horský, Martin ; Topič, Jan (referee) ; Počinková, Marcela (advisor)
The aim of my work is the heating and hot water for multi-functional building. The first part is devoted to solar systems. And both in terms of use and usability as well as the requirements relating to individual elements of the solar system.Conclusion The first part is devoted to the practical design of solar equipment forhot water. In the second part is devoted to design heating polifunkčního house. There isperformed a complete calculation and design. And the calculation of heat losses to the design of boiler and its connection to the system.
|
|
|
Passive apartment building
Čejka, Radek ; Klubal, Tomáš (referee) ; Brzoň, Roman (advisor)
The aim of the thesis is the proposal and the preparation of project documentation for the construction of passive residential building on a plot number 1691/96 cadastral area of Černovice in a Brno city. The residential building will be built in a sloping terrain. It is a five-storey residential building with one floor below ground. The house has 16 residential units and is designed for a maximum of 40 people. Two of the units are designed as a wheelchair accessible. The skeletal staircase of a building is located outside the main building. The residential units are connected by porch. The porch is built from a steel skeleton and is standing outside the main building. At the south side of building is free standing steel construction used as balcony for residential units. Perimeter wall is made of sand-lime blocks which are insulated by graphite expanded polystyrene. Perimeter wall of basement is made of permanent formwork filled with concrete. The wall is also insulated with extruded polystyrene. The ceilings are made of prestressed concrete panels Spiroll. The supporting roof structure is made of wood trusses. The roof is pitched and the roof deck is designed vegetational. The building is ventilated using forced air handling unit. Heating and hot water is provided sources: pellet boiler and photothermic panels. The apartment house is designed with regard to energy saving as passive. Emphasis is placed on a compact building envelope, simplicity of shape, air tightness, low heat loss and high solar gain arising due the building orientation to the cardinal directions.
|
|
|
Solar Gains in Buildings
Tenora, Tomáš ; Uher, Pavel (referee) ; Rubinová, Olga (advisor)
Master’s thesis deals with solar gains in buildings. The thesis presents an overview of the theoretical knowledge to solve solar gain. The thesis deals possibilities of measuring the intensity of solar radiation and evaluation of data from the meteorological station in the experimental part. Application of topic is then used for polyfunctional building. This part aims to show possibilities of design of air conditioning systems for the purpose of making indoor microclimate and their subsequent evaluation.
|
|
| |
guest ::
